Hott New Parts
Hayabusa Caliper Replacement Spike BoltsList Price:$64.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 032008-001) These beautifully crafted chrome billet grooved spike bolts replace the OEM right side front brake caliper for people who choose to run one front brake caliper and rotor. They are sold in pairs. This latest custom designed part from PPM fills the void that is left in the fork after removing the front brake caliper and definitely increases the "BLING" factor. Manufactured from 6061 aircraft grade billet aluminum, polished, and chromed for a brilliant finish. A perfect way to customize the Busa forks. Installs in approximately 2 minutes. After installation, this piece becomes a part of the bike. COMES COMPLETE WITH ALL HARDWARE Fits: '99-'07 Hayabusa and most bikes with conventional mounted calipers with 10mm holes
Suzuki Hayabusa Grab Rail Blockoffs With Lights List Price: $130.00 Shipping $8.50 to 48 states; $18.00 all other locations (product code #081707-001) HOT NEW PRODUCT!! You are looking at a set of chrome billet grab rail blockoffs with lights and logo engraved. These blockoffs are used to fill the gap between the rear seat and tail section when not running the rear grab rail. These blockoffs include red LED lights and can be wired to run as a brake light or turn signals. Check out our grab rail blockoffs without lights too. Fits: '99-'07 Hayabusa Domed Banjo Bolt CapList Price:$42.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 110907-002C) You are looking at another PPM exclusive part. This is a domed style chrome billet aluminum banjo cap. This cap covers the banjo bolt and banjo fitting at either end of the hydraulic brake or clutch lines. It installs in seconds using supplied stainless steel set screw. This is an excellent finishing touch to any bike. Fits: All sportbikes with hydraulic lines
Suzuki Hayabusa Hex Cargo BoltsList Price:$ 66.00 Shipping $5.00 to 48 states; $12.00 all other locations
(product code# 082506-002) You are looking at a set of chrome billet hex head cargo net bolts with logo engraved. They are a direct replacement to the ugly stock bolts and install in minutes. Check out our spike cargo bolts as well. Fits: '99-'08 Hayabusa
'99-'07 Hayabusa Chrome Logo Seat ThumbscrewsList Price:$64.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 081507-006A) You are looking a set of chrome billet seat bolts with logo engraved. If you are tired of grabbing a wrench everytime you need to take your seat off, then this is what you need! No tools required to remove these! These screws are knurled for use by hand! Seat can be removed and installed in less than a minute! This is a great addition for show bikes and ideal for drag racing! Check out our domed and spiked seat bolts too. Fits: '99-'07 Hayabusa
'99-'08 Hayabusa Chrome Billet Fork Dampener CapsList Price:$58.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 092007-002A) You are looking at a set of chrome billet fork caps with logo engraved for use with the stock Hayabusa triple tree. These caps cover the dampener part of the forks that is exposed through the stock triple tree. They install in minutes with supplied stainless steel set screws. Fits: '99-'08 Hayabusa
'99-'08 Hayabusa Chrome Billet Reflector ReplacementsList Price:$68.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 092007-001A) You are looking at a 2 piece set of chrome billet reflector replacements with logo engraved for the Hayabusa. They are a direct replacement to the ugly stock light reflectors. They will replace the front reflectors on the forks or the rear reflectors under the tail section. Fits: '99-'08 Hayabusa
'99-'08 Hayabusa Chrome Billet Rear Peg Bracket PlugList Price:$42.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 071807-002A) You are looking at a chrome billet rear peg bracket plug with logo engraved for the Hayabusa. It fills the hole in the rear peg bracket when removing the stock exhaust pipe. It works in the left or right peg bracket. Comes with all hardware and installs in minutes. Fits: '99-'08 Hayabusa
Hayabusa Chrome 3D Side Tank PadsList Price:$125.00 Shipping $8.50 to 48 states; $18.00 all other locations
(product code# 041907-003A) This is a brand new item from PPM. You are looking at a set of chrome billet side tank pads with logo engraved in 3D. These billet pads take the place of the plain, black, plastic tank pads on each side of the gas tank. Installation only takes minutes and stainless steel screws are included. Fits: '99-'07 Hayabusa
|
Hayabusa Caliper Replacement Bolts w/LogoList Price:$64.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 032008-002) These beautifully crafted chrome billet bolts w/logo engraved replace the OEM right side front brake caliper for people who choose to run one front brake caliper and rotor. They are sold in pairs. This latest custom designed part from PPM fills the void that is left in the fork after removing the front brake caliper and definitely increases the "BLING" factor. Manufactured from 6061 aircraft grade billet aluminum, polished, and chromed for a brilliant finish. A perfect way to customize the Busa forks. Installs in approximately 2 minutes. After installation, this piece becomes a part of the bike. COMES COMPLETE WITH ALL HARDWARE Fits: '99-'07 Hayabusa
Spiked Banjo Bolt CapList Price:$42.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 110907-001C) You are looking at another PPM exclusive part. This is a spiked style chrome billet aluminum banjo cap. This cap covers the banjo bolt and banjo fitting at either end of the hydraulic brake or clutch lines. It installs in seconds using supplied stainless steel set screw. This is an excellent finishing touch to any bike. Fits: All sportbikes with hydraulic lines
Hayabusa Hex Head Grab Rail Bolts w/LogoList Price:$66.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 082506-004) BRAND NEW PART FROM PPM! You are looking at another PPM exclusive part. This is a set of chrome billet hex head grail rail bolts with logo engraved (not pictured). They are a direct replacement to the ugly stock grab rail bolts. They install in minutes. Check out our matching hex head cargo bolts with logo engraved. Fits: '99-'08 Hayabusa
GSXR Chrome Logo Seat ThumbscrewsList Price:$64.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 081507-005A) You are looking a set of chrome billet seat bolts with logo engraved. If you are tired of grabbing a wrench everytime you need to take your seat off, then this is what you need! No tools required to remove these! These screws are knurled for use by hand! Seat can be removed and installed in less than a minute! This is a great addition for show bikes and ideal for drag racing! Check out our domed and spiked seat bolts too. Fits: '01-'06 GSXR 750 and 1000
2008 Hayabusa Chrome Logo Seat ThumbscrewsList Price:$64.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 081507-007A) You are looking a set of chrome billet seat bolts with logo engraved. If you are tired of grabbing a wrench everytime you need to take your seat off, then this is what you need! No tools required to remove these! These screws are knurled for use by hand! Seat can be removed and installed in less than a minute! This is a great addition for show bikes and ideal for drag racing! Check out our domed and spiked seat bolts too. Fits: '08 Hayabusa
'99-'08 Hayabusa Black Billet Fork Dampener CapsList Price:$58.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 092007-002B) PICTURE COMING SOON! You are looking at a set of black billet fork caps with logo engraved in silver for use with the stock Hayabusa triple tree. These caps cover the dampener part of the forks that is exposed through the stock triple tree. They install in minutes with supplied stainless steel set screws. Fits: '99-'08 Hayabusa
'99-'08 Hayabusa Black Billet Reflector ReplacementsList Price:$68.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 092007-001B) PICTURE COMING SOON! You are looking at a 2 piece set of black billet reflector replacements with logo engraved in silver for the Hayabusa. They are a direct replacement to the ugly stock light reflectors. They will replace the front reflectors on the forks or the rear reflectors under the tail section. Fits: '99-'08 Hayabusa
'99-'08 Hayabusa Black Billet Rear Peg Bracket PlugList Price:$42.00 Shipping $5.00 to 48 states; $12.00 to all other locations.
(product code# 071807-002B) PICTURE COMING SOON! You are looking at a black billet rear peg bracket plug with logo engraved in silver for the Hayabusa. It fills the hole in the rear peg bracket when removing the stock exhaust pipe. It works in the left or right peg bracket. Comes with all hardware and installs in minutes. Fits: '99-'08 Hayabusa
Hayabusa Black 3D Side Tank PadsList Price:$125.00 Shipping $8.50 to 48 states; $18.00 all other locations
(product code# 041907-003B) PICTURE COMING SOON! This is a brand new item from PPM. You are looking at a set of black billet side tank pads with logo engraved in silver in 3D. These billet pads take the place of the plain, black, plastic tank pads on each side of the gas tank. Installation only takes minutes and stainless steel screws are included. Fits: '99-'07 Hayabusa
Suzuki Hayabusa Grab Rail BlockoffsList Price:$87.00 Shipping $6.00 to 48 states; $15.00 to all other locations.
(product code# 053107-001) HOT NEW PRODUCT!! You are looking at a set of chrome billet rear grab rail blockoffs with logo engraved. These take the place of the stock grab rail to fill the gap between the seat and tail section if you choose not to run the grab rail. Fits: '99-'07 Hayabusa
|
|
|
|
|
Login Status
